Fluorophenyl derivatives of elements II-VI groups

The enthalpies and temperatures of melting of RSi(CH₃)₃, R₄Si, R₃P, R₃As, R₃Sb, R₃Bi, R₂Te and R₂Hg (R=C₆F₅) were obtained by scanning calorimetry measurements. The pressure of the saturated and unsaturated vapors of RSi(CH₃)₃, R₂Si(CH₃)₂, R₄Si, R₃Ga, R₃P, R₃As, R₃Sb, R₃Bi, R₂Te and R₂Hg has been measured by the static method with a membrane-gauge manometer. It was established that all investigated substances proceeded to vapor as monomers. Equations approximating the dependences of saturated vapor pressures on temperature and the enthalpies and entropies of vaporization were obtained. Grafite films with silicon intercalated up to 25 at.% were grown by CVD using R₄Si as a precursor. These films showed semiconductor properties in the temperature interval 80–300 K.     

Freeze–thaw approach: A practical sample preparation strategy for residue analysis of multi‐class veterinary drugs in chicken muscle

Seven drugs from different classes, namely, fluoroquinolones (enrofloxacin, ciprofloxacin, sarafloxacin), sulfonamides (sulfadimidine, sulfamonomethoxine), and macrolides (tilmicosin, tylosin), were used as test compounds in chickens by oral administration, a simple extraction step after cryogenic freezing might allow the effective extraction of multi‐class veterinary drug residues from minced chicken muscles by mix vortexing. On basis of the optimized freeze–thaw approach, a convenient, selective, and reproducible liquid chromatography with tandem mass spectrometry method was developed. At three spiking levels in blank chicken and medicated chicken muscles, average recoveries of the analytes were in the range of 71–106 and 63–119%, respectively. All the relative standard deviations were <20%. The limits of quantification of analytes were 0.2–5.0 ng/g. Regardless of the chicken levels, there were no significant differences (P > 0.05) in the average contents of almost any of the analytes in medicated chickens between this method and specific methods in the literature for the determination of specific analytes. Finally, the developed method was successfully extended to the monitoring of residues of 55 common veterinary drugs in food animal muscles.     

Hypercrosslinked particles for the extraction of sweeteners using dispersive solid‐phase extraction from environmental samples

This work presents a new extraction material, namely, Q‐100, based on hypercrosslinked magnetic particles, which was tested in dispersive solid‐phase extraction for a group of sweeteners from environmental samples. The hypercrosslinked Q‐100 magnetic particles had the advantage of suitable pore size distribution and high surface area, and showed good retention behavior toward sweeteners. Different dispersive solid‐phase extraction parameters such as amount of magnetic particles or extraction time were optimized. Under optimum conditions, Q‐100 showed suitable apparent recovery, ranging in the case of river water sample from 21 to 88% for all the sweeteners, except for alitame (12%). The validated method based on dispersive solid‐phase extraction using Q‐100 followed by liquid chromatography with tandem mass spectrometry provided good linearity and limits of quantification between 0.01 and 0.1 μg/L. The method was applied to analyze samples from river water and effluent wastewater, and four sweeteners (acesulfame, saccharin, cyclamate, and sucralose) were found in both types of sample.     

Determination of organophosphate flame retardants in soil and fish using ultrasound‐assisted extraction,solid‐phase clean‐up,and liquid chromatography with tandem mass spectrometry

A solid–liquid extraction method in combination with high‐performance liquid chromatography and tandem mass spectrometry was developed and optimized for extraction and analysis of organophosphorus flame retardants in soil and fish. Methanol was chosen as the optimum extraction solvent, not only in terms of extraction efficiency, but also for its broader analyte coverage. The subsequent clean‐up by solid‐phase extraction is required to eliminate matrix coextractives and reduce matrix effects. Recoveries of the optimized method were 50–121% for soil and 47–123% for biota, both with high precision (RSDs <12% in soil and <23% in biota). The method limits of detection ranged from 0.06 to 0.20 ng/g dry weight and between 0.02 and 0.30 ng/g wet weight for soil and biota samples, respectively. However, samples with a high lipid content produce several problems as solid‐phase extraction cartridge clogging that increase variability and analysis time. The method was successfully applied for the determination of organophosphorus flame retardants in soil and fish from L'Albufera Natural Park (Valencia, Spain). Target compounds were detected in all soil and fish samples with values varying from 13.8 to 89.7 ng/g dry weight and from 3.3 to 53.0 ng/g wet weight, respectively.     

链状Silicalite-1分子筛的合成

在传统的合成体系中, 加入聚电解质聚二烯丙基二甲基胺盐酸盐(PDDA)自组装合成链状的Silicalite-1分子筛材料, 考察了PDDA的加入对产物的影响, 并对其进行了XRD和SEM表征.     

微流控芯片分析系统中硅胶整体柱和膜滤复合预处理单元的构建

以改性C18反相硅胶整体柱为微流控芯片分析系统中固相萃取介质材料, 构建不同功能单元的样品预处理微分析系统, 实现了血清样品中痕量盐酸多巴酚丁胺的富集. 初步构建了单一改性硅胶微柱固相萃取预处理单元, 测试得到了改性硅胶整体柱对血清中痕量盐酸多巴酚丁胺的平均富集倍数为77.2, RSD为12.35％. 为了提高测试的精密度, 进而设计含膜复合式预处理芯片, 探讨了不同预处理单元对血清样品中痕量盐酸多巴酚丁胺富集效率的影响, 优化设计了外接式硅胶整体柱-亲和膜微芯片固相萃取预处理单元, 复合式的反相硅胶整体柱对血清中微量盐酸多巴酚丁胺的平均富集倍数提高到89.4, RSD为4.37％. 结果显示了该预处理单元在血清中痕量药物富集的可行性和有效性.     

液相微萃取-反萃取在磺胺药物残留测定中的应用

利用液相微萃取-反萃取技术,建立测定动物组织中磺胺药物残留量的新方法.将动物组织中磺胺药物经液相微萃取-反萃取后进行高效液相色谱紫外检测.磺胺、磺胺嘧啶、磺胺二甲嘧啶、磺胺喹口恶啉4种磺胺类药物的线性范围均在0.05～10.0 μg/mL,磺胺甲口恶唑的线性范围在0.5～10.0 μg/mL之间,方法的平均回收率不低于80.2%,RSD＜6.8%,检出限为0.1 mg/kg.     

饮酒者唾液中乙醇浓度的酶催化光度法测定

研究了醇氧化酶-过氧化氢酶联合的酶促反应的最佳条件,建立了简便测定乙醇的吸光光度法,乙醇浓度在0.0686~5.115 mmol/L范围内符合比尔定律,回归方程为:A=0.00403 0.08585c(mmol/L),相关系数为0.9986,检出限为0.0172 mmol/L(S/N=3),本法所用仪器简单,已用于酒后唾液中乙醇的测定。     

纤维素酶前处理没药挥发油成分的GC/MS分析

采用水蒸汽蒸馏法分别从未处理和纤维素酶前处理的没药中提取挥发油,利用气相色谱-质谱(GC/MS)联用技术对其挥发油成分进行分析。从中分别鉴定出38种和34种化学成分,用峰面积归一法通过数据处理系统得出各化学成分在挥发油中的质量分数,占挥发油总成分的67.95%和70.05%。     

聚苯胺内方形微米管和方形微米棒的可控制备和结构

以柠檬酸为掺杂剂、过硫酸铵为氧化剂,通过改变苯胺单体的浓度实现了聚苯胺微/纳米结构的可控的自组装制备.在较高苯胺单体浓度时,自组装得到具有内方形的导电态聚苯胺微米管,其直径约为580~300nm,管壁厚约为80 nm.而在极稀的苯胺单体浓度时,自组装得到正方形横截面的方形微米棒,其横截面的边长约为690~290 nm,长度约为1~40μm.结构表征结果证明,所得的微米方形棒是N—N单键结合的聚氮烷;而延长聚合反应时间,则可得到本征态聚苯胺微米管.